Standard Doors
Grooved Doors
Custom/Oversize Doors
Standard Oversize Steelx1 & Steelx2 Door Cores
2400Uni Steel 1
Steel Insert High Density EPS Solid Core Polystyrene
2400Uni Steel 2
Steel Insert High Density EPS Solid Core Polystyrene
PLEASE NOTE: Stock Steel insert Uni (Universal) Doors are manufactured with 4mm skins (38mm thick door) only .
All other skin thicknesses or custom width doors are made to order and are not manufactured to be cut down. If you require a Uni door with any other skin thickness you must specify this when placing your order.
Also note our 3mm 2200 stock doors are not Uni doors and there for not manufactured to be cut down.
- Rails : 168mm Finger Jointed Pine
- Stiles : 40mm Finger Jointed Pine
- 640x68mm Finger Jointed Pine
- Rails : 168mm Finger Jointed Pine
- Stiles : 40mm Finger Jointed Pine
- 640x68mm Finger Jointed Pine
- Custom designed and precision engineered
- Anti corrosive pre galvanised steel
- 38.1 x 29.9mm with 1.6mm wall thickness for added rigidity
- High Density Solid Core Polystyrene
- Up to 98% Glue Contact area
- Will not delaminate after impact
- Enhanced thermal qualities
- High Density Solid Core Polystyrene
- Up to 98% Glue Contact area
- Will not delaminate after impact
- Enhanced thermal qualities
- Base material from New Zealand steel.
- Precision manufactured to 38.1 x 29.9mm, with 1.6mm wall thickness for added rigidity. Pre Galvanised for clean finish.
- Z250 - 275 (Zinc content weight)
- G250 grade material (NZ steel specification)
- 100 percent NZ Made
- ISO9000 Accredited Manufacturer
The Superior Difference
Downloads
Contact
Copyright 2015 Superior Doors Ltd (SDL) all material, images, artwork and copy on the SDL website is the copyright of SDL.